CONTACTS
THE LUMINAIRE IS IN PREPARATION.
Robust linear luminaire designed for explosion hazardous environments for ATEX zone 1/21. The body is made of highly durable extruded aluminium with ELOX coating guaranteeing extremely high resistance to salty environments. Corrosion resistance C5M. Luminaire end caps are made of special painted aluminium (low copper content), resistant to marine environments. The silicone seal not only guarantees extremely high water and dust resistance IP66/IP67, but also guarantees high resistance to chemicals or oils. The innovative smooth design reduces the deposition of dust and water on the surface of the luminaire, and the clever design allows for efficient heat dissipation, guaranteeing a long service life of the luminaire. Equipped with certified electronic components - the encapsulated LED module and driver guarantee a high efficiency of up to 140 lm/W and an LED lifetime of up to 65,000 hours even at high temperatures. Suitable for extreme ambient temperatures from -40 °C to +60 °C (depending on luminaire variant). The luminaire is mounted using innovative clamps that allow a wide flexible mounting distance, making it a suitable choice when replacing old luminaires where it is not possible to change the distance of the mounting holes. A wide range of brackets, brackets and hangers allows the luminaire to be mounted on the ceiling, wall or suspended. The luminaire can be mounted on a pole using a boom.
ADVANTAGES:
- European product - made in the Czech Republic
- Innovative design
- ATEX/IECEx certification - zone 1/21
- High water and dust resistance IP66/IP67
- High chemical resistance
- UV resistance
- High corrosion resistance C5M
- High specific output up to 140 lm/W
- Performance variants from 1 900 to 14 000 lm
- DALI2 control
Operating voltage:
110-254 V / 50/60 Hz AC, 220-250 V DC
Source ::
LED, 5000K, CRI +80
Housing:
Aluminium profile AW6060 with anodic oxidation coating
Cover:
GC- clear safety glass
GF - opal version
GM - microprismatic version
Fastening:
Using mounting pens for ceiling or wall mounting. Other options for mounting on a pipe, boom or by hanging.
Connection:
Screwless terminal block max. wire cross section 4 mm2
Standard equipment:
2x Ex plastic cable gland M20, 3x Ex plastic cable plug M20, 2x mounting pen
LORD-EX1/21 - ATEX - (FTZÚ 25 ATEX 0070X)
II 2G Ex eb mb IIC T4 Gb II 2D Ex tb IIIC T85°C Db
LORD-EX1/21 - IECEx - (IECEx FTZU 25.0023X)
Ex eb mb IIC T4 Gb
Ex tb IIIC T85°C Db
No posts found.
THE LUMINAIRE IS IN PREPARATION.
Robust linear luminaire designed for explosion hazardous environments for ATEX zone 1/21. The body is made of highly durable extruded aluminium with ELOX coating guaranteeing extremely high resistance to salty environments. Corrosion resistance C5M. Luminaire end caps are made of special painted aluminium (low copper content), resistant to marine environments. The silicone seal not only guarantees extremely high water and dust resistance IP66/IP67, but also guarantees high resistance to chemicals or oils. The innovative smooth design reduces the deposition of dust and water on the surface of the luminaire, and the clever design allows for efficient heat dissipation, guaranteeing a long service life of the luminaire. Equipped with certified electronic components - the encapsulated LED module and driver guarantee a high efficiency of up to 140 lm/W and an LED lifetime of up to 65,000 hours even at high temperatures. Suitable for extreme ambient temperatures from -40 °C to +60 °C (depending on luminaire variant). The luminaire is mounted using innovative clamps that allow a wide flexible mounting distance, making it a suitable choice when replacing old luminaires where it is not possible to change the distance of the mounting holes. A wide range of brackets, brackets and hangers allows the luminaire to be mounted on the ceiling, wall or suspended. The luminaire can be mounted on a pole using a boom.
ADVANTAGES:
- European product - made in the Czech Republic
- Innovative design
- ATEX/IECEx certification - zone 1/21
- High water and dust resistance IP66/IP67
- High chemical resistance
- UV resistance
- High corrosion resistance C5M
- High specific output up to 140 lm/W
- Performance variants from 1 900 to 14 000 lm
- DALI2 control
Operating voltage: 110-254 V / 50/60 Hz AC, 220-250 V DC ; Source: LED, 5000K, CRI +80 ; Body: Aluminium profile AW6060 with anodic oxidation coating ; Cover: ; GC - clear safety glass ; GF - opal version ; GM - microprismatic version ; Mounting: Using mounting pens for ceiling or wall mounting. Other mounting options: pipe, boom or suspension. Connection.2 ; Standard equipment: 2x Ex plastic cable gland M20, 3x Ex plastic cable plug M20, 2x mounting pen; LORD-EX1/21 - ATEX - (FTZÚ 25 ATEX 0070X) II 2G Ex eb mb IIC T4 Gb II 2D Ex tb IIIC T85°C Db; LORD-EX1/21 - IECEx - (IECEx FTZU 25.0023X)Ex eb mb IIC T4 GbEx tb IIIC T85°C Db